| WOVEN DOUBLE JACKET HOSE |
|
8D Hose
Polyester Double Jacket Hose
National 8D hose is a premium quality, industrial grade, double jacket hose with a lightweight EPDM (Ethylene Propylene Diene Monomer) rubber liner that can handle pressures up to 375 psi (2585 kPa).
Click
here to view Product Information
|
|
Polyester Double Jacket Hose
National 6D hose is designed almost identically to our type 8D hose but for lower operating pressures at 275 psi (1895 kPa) maximum.
Click here to view Product Information
|
|
Polyester Double Jacket Hose
National 8M mine hose is a premium quality Neoprene rubber lined, double jacket hose that has been MSHA (Mine Safety & Health Administration) approved for use in any mine.
Click here to view Product Information
|
|
Polyurethane Lined Hose
National 8T has the same jacket construction as 8D in that it is made with two jackets of tightly woven polyester but is lined with polyurethane which is lighter and packs tighter than 8D.
Click here to view Product Information |
|
| WOVEN SINGLE JACKET HOSE |
|
3P - Low Pressure
Polyester Single Jacket Hose
National 3P is an economical single jacket industrial hose made from high strength polyester along with an EPDM rubber liner.
Click
here to view Product Information
|
|
5P - Medium Pressure
Polyester Single Jacket Hose
National 5P hose is the perfect medium pressure hose that is tough enough to meet most application requirements while remaining economical for most budgets.
Click
here to view Product Information
|
|
6P - High Pressure
Polyester Single Jacket Hose
National 6P hose is a higher pressure hose that is tough enough to be used for industrial firefighting. 6P is a polyester single jacket style hose with an EPDM rubber liner that can also handle some chemicals and petroleum based products.
Click
here to view Product Information
|
|
5M - Mine Hose
Polyester Single Jacket Hose
National 5M mine hose is a polyester single jacket hose with a Neoprene rubber liner that resists burning inherently better than exclusively hydrocarbon rubber.
Click
here to view Product Information
|
|
| RUBBER HOSE |
|
3-Ply Nitrile Rubber Hose
Snap-tite Hose TPX utilizes a unique 3-ply design where the cover and liner are extruded independently and double vulcanized to guarantee a consistent, compact hose wall.
Click here to view Product Information |
|
Extruded Rubber Hose
Snap-tite Hose HFX is a nitrile thru-the-weave, rubber covered fire hose that utilizes both polyester and nylon yarn in the reinforcing jacket.
Click here to view Product Information |
|
3-Ply Rubber Hose-High Pressure
Manufactured in similar process as TPX, except designed for higher pressures, Snap-tite Hose ATX utilizes a 3-ply design where the cover and liner are extruded independently and double vulcanized to guarantee a consistent, compact hose wall.
Click here to view Product Information |
|
Lightweight Extruded Rubber Hose
Snap-tite Hose LD is a premium quality, nitrile rubber covered fire hose that is manufactured using a unique process which permanently bonds the polyester reinforcement to the nitrile rubber cover/liner.
Click here to view Product Information |
|
| POLYUETHANE HOSE |
|
Extruded Polyurethane Hose
Snap-tite Hose TE hose is compact and weather, abrasion and crack resistant. Capable of operating pressures up to 225 psi (1550 kPa) (not all sizes), TE is also made of NSF Standard 61 approved materials and can be used for potable water.
Click here to view Product Information |
|
| |
